Directions

Directions to Head office, UK: Sercon Ltd, Wistaston Road, Crewe, Cheshire, UK, CW2 7RP

SerCon are based in the North West of the UK in Crewe, Cheshire.

From The North (And Manchester Airport)

The best way to approach SerCon is via the Motorway Network. If arriving at Manchester airport, follow the signs for the M56 and once on the M56, follow the signs for the M6 Southbound.

1 From M6 Junction 17 take the exit towards Sandbach/Crewe A534. At the traffic lights go straight on.

2 At the roundabout, take the first exit onto the A534 - go 1.7 miles.

3 At the next roundabout, take the second exit onto the A534 - go 2.4 miles.

4 At the next roundabout take the third exit onto Crewe Green road - go 0.4 miles.

5 At the next roundabout near the University, take the second exit onto crewe road - Dual carriageway for 0.4 miles.

6 At the next roundabout by B&Q, take the second exit onto Nantwich road. Continue past Crewe Railway Station and over two pedestrian crossings until you come to a set of major traffic lights. Go straight on at the traffic lights and take the next junction on the right - Edleston road - go 0.5 miles.

7 At the next cross roads, turn left onto Wistaston Road.Go straight on at the first set of traffic lights. Continue straight on at the second set of traffic lights - junction with Flag Lane. Wistaston Road Businesss park is the second turning on the left immediately after Bridle Road.

From The South

1 Leave the M6 at Junction 16 and follow the signs for the A500 to Crewe/Nantwich and Chester - 1st exit on the roundabout.

2 On the A500 - go 2.2 miles

3 At the next roundabout (A500/A5020/A525) take the 3rd exit onto old park road.

4 At the next roundabout take the 1st exit onto Weston Road - go 0.9 miles

5 At the next roundabout, take the second exit* onto Weston road - go 1.0 miles

6 At the next roundabout, take the first exit onto Nantwich road, past the station and then the remaining directions are as step 6 above.